SwanSpeaker - speakerunits Swans USA
Home Actueel Route midrange and woofers Index speakerunits Rotel Marantz Hifi Bouwsets Reacties Bestellen Feedback

SwanSpeaker - tweeters - midranges - woofers - Coaxial Full-Range

De luidsprekers van SwanSpeaker zijn afkomstig van een nieuw, uiterst modern bedrijf. Ieder detail is nauwkeurig onderzocht en geperfectioneerd. Nieuwe materialen zijn op een innoverende wijze toegepast. Het conusmateriaal van de "M" serie bestaat uit een magnesium/aluminium composite; van de "F" serie uit Keflar/Paper composite. Deze compositie elimineert de nadelen van beide afzonderlijke materialen. Ook de tweeters zijn van een uitzonderlijke kwaliteit, ragfijne weergave met alle details.
Bij SwanSpeaker worden de speakers gebouwd met een hoge precisie en nauwe toleranties. Behalve met metingen worden de units ook op het gehoor getest.
Met deze speakers geniet u van een maximaal haalbare geluidskwaliteit.

© Swans HiVi Inc.(USA) 2011 REMO luidsprekerspecialist - REMO hifi audiospecialist - REMO home cinema specialist - tel 070 38 68 440

RT2C-A Isodynamic tweeter

prijs € 79
RT2C-A - technical data
afmetingen
Nominal Power Handling (Pnom)
Max Power handling (Pmax)
power handling with correct crossover
frequentiebereik
sensitivity (2.83v/1m)
nominal impedance (Z) =DC
magneet systeem
Lowest Crossover Freq.
Weight (M)
176 mm
40 watt
60 watt
100 watt*
3 kHz - 35 kHz
93 dB
8 ohm
Neodymium
3000 Hz*
0,87 Kg

Voor het bereiken van de hoogste kwaliteit en *belastbaarheid met deze bijzondere tweeter dient zorgvuldig gefilterd te worden. Laat u door ons hierover adviseren bij de aankoop!

RT2C-A Isodynamic tweeter features

RT2C- A becomes the core unit of the Burmester Berlin sound company of the German Hi- end industry super loudspeaker system Reference- line loudspeaker B99. Why do we call the RT2C-A Isodynamic? Contrary to a conventional dynamic driver, this transducer has a driving force distributed evenly over the whole area of the vibrating element.


RT2C-A features
What is special about the RT2C-A?
The key element of the RT2C-A is the membrane, which consists of Kapton Film with a pattern of Aluminum conductors. The conductors cover about 90% of the whole vibrating area. The membrane assembly is placed precisely between two rows of Neodymium and Barium Ferrite bar magnets. This tweeter has a larger membrane area than the RT1C-A, providing higher power handling and substantially extended low-end cut-off frequency. The Aluminum mounting flange, with flared wave-guide, controls the frequency response and directivity of the tweeter. The clamped membrane area is connected to the more massive front metal plate. This, combined with a special heat conductive compound, provides effective cooling of the aluminum conductors, dramatically increasing the dynamic range of the RT2C-A. This tweeter is magnetically shielded and is an extremely flat driver. Its depth is only 27 mm including the mounting flange. The vibrating element of the RT2C-A is almost weightless compared to that of a dome tweeter. As a result it provides an immediate and precise response to any transients in the original signal.		 The RT2C-A has an exceptional ability to reveal the dynamics of instruments with complex high frequency spectra. Unlike conventional tweeters and electrostatic speakers, the RT2C-A has an extremely wide sound dispersion in the horizontal plane. At the same time, contrary to other dynamic tweeters, the RT2C-A has well-controlled dispersion in the vertical plane. This feature helps to avoid disturbing floor and ceiling reflections, increasing imaging accuracy. With this tweeter there is no need to manipulate the network or use multiple units to achieve the restricted vertical directivity necessary for home theater applications. When considering all of the properties of the RT2C-A, it becomes clear why many critical listeners among audiophiles highly prize planar transducers. They possess unsurpassed clarity, transparency and the ability to deliver every tiniest musical detail. Since the RT2C-A has exceptional ability to reveal the dynamics of instruments and sonic resolution, it is recommended to match it with drivers having similar properties in order to maximize the overall integrity of a speaker system.


  Grafieken RT2C-A - KLIK HIER voor grote en meer afbeeldingen en alle gegevens



RT2C-A Frequency Response RT2C-A Impedance RT2C-A Mechanical Drawing

© Swans HiVi Inc.(USA) 2011


De eigenschappen van de Isodynamic (ribbon) tweeter
Traditional dometweeter electromotion style loudspeaker applied voice coil to make film membrane work indirectly, which makes easy produce various of unbalanced sound, meanwhile difficult to replay high sound pressure because of the restrict of physics materials. The ribbon loudspeaker's voice coil is manufactured in the surface of the film membrane, which can sync and equally drive air. It has world recognized features, i.e. quick response, low-distortion, accurate and clean sound. Swans has researched ribbon tweeter for several years, during this time. Many products were born, of which brand new RT1-II was born recently on the base. The film membrane of it applied Kapton, which voice and film membrane combine together, the aluminum conduction part of voice coil takes more than 90% and painted 3um anti-oxidized coating can prevent the aluminum oxidation when sudden hot for aluminum conduction wire.The vibration quality can be ignored compare with traditional ball top tweeter, it is of 25mg, just as 1/5 of common tweeter, which means that any input transient state messages can be made transient response.
© Swans HiVi Inc.(USA) 2011 REMO luidsprekerspecialist - REMO hifi audiospecialist - REMO home cinema specialist - tel 070 38 68 440

RT2-II Isodynamic tweeter

prijs € .. bel ons
RT2-II - technical data
afmetingen
Nominal Power Handling (Pnom)
power handling with crossover
frequentiebereik
sensitivity (2.83v/1m)
nominal impedance (Z) =DC
magneet systeem
Lowest Crossover Freq.
Weight (M)
186x160 mm
30 watt
150 watt
2 kHz - 27 kHz
93 dB
8 ohm
Neodymium
2000 Hz
0,87 Kg
RT2-II Isodynamic tweeter features

The driving systems composed of 2 layers of neodymium iron boron magnet create a push-pull actuation, which fill excellent absorb sound materials at back of film membrane, increase damp at back of film membrane, eliminate unnecessary vibration and reduce distortion. The panel of it applied new duralumin alloy, the needs of sound radiation to design its shape, which match with 2 row holes of front armor plate create equal and wide response. There is no resonance in working frequency band and impedance curve is a beeline, there is nearly no resonance wave distortion. Knowing all of the fantastic features of RT1-II, comparing with common speakers, it will give you a definite answer: Why are nitpicks audiophiles looking for ribbon loudspeakers in speaker books? Because they cannot find a loudspeaker whose sound are clear, clarity and full details, but those are the outstanding features of ribbon tweeter.



RT2-II - klik op de afbeelding voor een vergroting
RT2-II Frequency Response
RT2-II Impedance
© Swans HiVi Inc.(USA) 2011 REMO luidsprekerspecialist - REMO hifi audiospecialist - REMO home cinema specialist - tel 070 38 68 440

RT1C-A Isodynamic tweeter

RT1C-A Isodynamic tweeter
prijs € .. bel ons
RT1C-A - technical data
diameter
hoogte
Nominal Power Handling (Pnom)
power handling with crossover
frequentiebereik
sensitivity (2.83v/1m)
nominal impedance (Z) = DC
magneet systeem
magneet systeem
gewicht (M)
Recommended Crossover freq.
120 mm
17 mm
15 watt
100 watt
4,7 - 27 kHz
94 dB
5 ohm
Neodymium
shielded
0,2 Kg
> 4500
RT1C-A features

The RT1C-A has an exceptional ability to reveal the dynamics of instruments with complex high frequency spectra. Unlike conventional tweeters and electrostatic speakers, the RT1C-A has an extremely wide sound dispersion in the horizontal plane. The radiating area of the tweeter is 50 x 13 mm, where 13mm defines the horizontal dimension.
At the same time, contrary to other dynamic tweeters, the RT1C-A has well-controlled dispersion in the vertical plane.
This feature helps to avoid disturbing floor and ceiling reflections in home environments. What is wonderful is that you don't have to use three tweeters in home theater systems anymore in order to achieve the desired vertical directivity


Grafieken RT1CA - klik op de afbeelding voor een vergroting

RT1C-A Frequency Response RT1C-A Impedance


RT1L isodynamic tweeter
prijs € .. bel ons
RT1L tweeter - technical data
Diameter
Nominal Impedance (Z)
DC (Re)
resonance frequency (Fs)
nominal power handling (Pnom)
power handling with crossover
sensitivity 2.83v/1m
weight (M)
recommended crossover freq.
110 mm
4 ohm
4 ohm
none
10 watt
100 watt
88 dB
0.8 Kg
> 3500 Hz
magnet system: dispersed magnetic field circuit
RT1L Isodynamic tweeter features

  • Innovational style of pointing style design
  • Round ribbon ring-like film membrane eliminate the differences between uprightness and parallel
  • Soundstage orientation makes more accurate and nature
  • Brand-newly improved optimize radiation angle panel design makes sound express clean and smooth
  • The breakthrough patent dispersed equilibria isodynamic field supplies powerful and non-ending actuation resource
  • Full-copper alloy phase cone regulates ultra-high frequency phase response
  • Toping representation for air quality sense.
    		•

      Grafieken RT1L - klik op de afbeelding voor een vergroting
    RT1L Frequency Response RT1L Impedance


    SS1-II High-end dome tweeter


    prijs € .. bel ons

    SS1-II tweeter - technical data
    diameter
    Nominal Impedance (Z)
    Resonance Frequency (Fs)
    Nominal Power Handling (Pnom)
    power handling with crossover
    Sensitivity (2.83v/1m)
    Weight (M)
    VC Diameter (mm)
    DC (Re)
    VC Layers
    VC Former
    VC Frame
    Magnet System
    Magnet Former
    Crossover Frequency
    102 mm
    5 Ohms
    1300 Hz
    15 Watt
    120 Watt
    91 dB
    0.6 Kg
    25 
    4.6 Ohm
    2
    CCAW 
    ALuminium
    Shielded
    Ferrite
    > 2600 Hz 

    SS1-II dome tweeter features

    Heat-resistant, high damping dome membrane made of natural fiber High-performance magnets, antimagnetic shielded magnetic structure with great driving force
    High power handling voice coil with heat-resistant aluminum alloy former and aluminum voice coil wire coated with copper
    Rigid M.I. front panel design-prevents unnecessary vibration
    Antimagnetic design-could be directly applied on home theatre system
    Recommended crossover frequency above 2000 Hz
    Suitable for the tweeter of home hi-fi and home theater system
    It is upgraded from SS1, and could replace SS1 without changing crossover


       Klik op de afbeelding voor een vergroting
    SS1-II Frequency Response SS1-II Impedance SS1-II Mechanical Drawing


    K1 high-end tweeter

    prijs € .. bel ons


    K1 tweeter - technical data
    diameter
    nominal impedance (Z)
    resonance frequency (Fs)
    nominal power handling (Pnom)
    power handling with crossover
    sensitivity (2.83v/1m)
    weight (M)
    VC Diameter
    DC (Re)
    VC Layers
    VC Former
    VC Frame
    magnet system
    magnet former
    recommended crossover freq. 
    116 mm
    5 ohm
    800 Hz
    15 W
    100 W
    92 dB
    0.9 kg
    25 mm
    4.6 ohm
    2
    CCAW
    ALuminium
    shielded
    Ferrite
    >2500Hz


    K1 tweeter Features

    The K1 tweeter is of SwanSpeaker new first-class ball top high frequency loudspeaker applied Germany natural fibre first-class film membrane; special painted damp greatly improved sound quality of high frequency. It has advantages of smooth frequency response, above 20kHz high frequency, high clarity, well transient response, natural tamber, having heat-resistant aluminium magnesium alloy framework and beautiful appearance.

    The tweeter has a wide frequency response, small unequal level, exquisite and natural tabmer, and well energy feeling of intermediate frequency; it is a fantastic tweeter and widely-applied.



      Grafieken K1 - klik op de afbeelding voor een vergroting
    K1 Frequency Response K1 Impedance K1 Mechanical Drawing


    Q1R high-quality tweeter
    prijs € .. bel ons
    Q1R tweeter - technical data
    Diameter
    Nominal Impedance (Z)
    Resonance Frequency (Fs)
    Nominal Power Handling (Pnom)
    power handling with crossover
    Sensitivity (2.83v/1m)
    Weight (M)
    VC Diameter
    DC (Re)
    VC layers
    VC former
    VC frame
    Magnet system
    Magnet former
    Recommended crossover freq.
    116 mm
    6 ohm
    1000 Hz
    15 watt
    100 watt
    89 dB
    0.8 Kg
    28 mm
    5,3 ohm
    2
    CCAW
    aLuminium
    shielded
    Ferrite
    >2500 Hz
    Q1R high-quality tweeter features

    Tweeter is spirit of a system, its tamber, transient state, quality, trends compress, and distortion, etc have crucial effect. So, SwanSpeaker put out a series of unit Q1 with the above features. We believe that its full-bodied tamber, sense of becoming a fairy and unequalled transient state deeply impressed many people

    With the development of technology, higher and higher pursuit requires us continual to optimize every function of this loudspeaker. It applied the finite element simulation and optimizes symmetrical shield anti-magnetic magnetic circuit, trends surge more evenly. Resonance distortion can be effectively reduced matching with low distortion magnetic circuit. Anti-magnetic design make its applicable scope is more broad. Used Ferrosound fluid magnet cooling match with CCAW loop to reduce vibration quality, improve power handling makes transient state better.



      Grafieken Q1R - klik op de afbeelding voor een vergroting



    Q1R Frequency Response Q1R Impedance Q1R Mechanical Drawing


    TN25 high-quality tweeter




    prijs € .. bel ons
    TN25 tweeter - technical data
    afmetingen
    nominal impedance (Z)
    resonance frequency (Fs)
    sensitivity (2.83v/1m)
    nominal power handling (Pnom)
    power handling with crossover
    weight (M)
    VC diameter
    DC (Re)
    VC layers / former
    VC frame
    magnet system
    magnet former
    recommended crossover freq.
    54,5 x 54,5 mm
    5 Ohm
    1500 Hz
    90 dB
    15 watt
    100 watt
    0.09 Kg
    25 mm
    4,6 Ohm
    2 / CCAW
    aluminium 
    shielded 
    neodymium
    >2000 Hz

    TN25 features

    High-end natural fiber dome membrane;
    Flat frequency response, could reach 25 Kc in high frequency range;
    High-performance, shielded Neodymium magnets;
    Sandwich antimagnetic structure, effectively supresses the leakage magnetic field, forming a small linear uniform magnetic field;
    Heat-resistant, high power handling ferro fluid cooled voice coil with aluminium alloy former and aluminium voice coil wire coated with copper;
    Sound absorption rear acoustic chamber design decreases the non-linear distortion near the resonance frequency.
    TN25 can be used as a tweeter of center channel speaker or surround speaker in a home theater system.

      Grafieken TN25 - klik op de afbeelding voor een vergroting


    TN25 Frequency Response TN25 Impedance TN25 Mechanical Drawing



    SWANS TN28 HIGH-QUALITY DOME TWEETER

    prijs € 29
    SWANS TN28 - technical data
    General Data
    Nominal Power Handling (Pnom)(W)
    Max Power Handling (Pmax)(W)
    Sensitivity (2.83v/1m)(dB)
    Weight (M)(Kg)
    Electrical Data
    Nominal Impedance (Z)(ohm)
    DC (Re)(ohm)
    Voice Coil and Magnet Parameters
    VC Diameter (mm)
    VC Length (H)(mm)
    VC Former
    VC Frame
    Magnet System
    Magnet Former
    Tiele-Small Parameters
    Resonance Frequency (Fs)(Hz)
    -
    15
    30
    90
    0.14
    -
    6
    5.1
    -
    28
    2
    CCAW
    Aluminium
    Shielded
    Neodymium
    -
    1300



    Grafieken TN28 - KLIK HIER voor grote en meer afbeeldingen en alle gegevens

    TN28 Frequency Response TN28 Impedance TN28 Dimensions

    © Swans HiVi Inc. (USA) 2011




    SwanSpeaker - midrange - bas/midranges - woofers

    DMA-A - high-end midrange

    prijs € .. bel ons
    DMA-A dome midrange - technical data
    Diameter x hoogte
    Nominal Impedance (Z)
    Resonance Frequency (Fs)
    Nominal Power Handling (Pnom)
    Sensitivity (2.83v/1m)
    Weight (M)
    VC Diameter
    DC (Re)
    VC Former
    VC Frame
    VC Layers
    Magnet System
    Magnet Former
    Recommended Crossover Freq.
    145 x 43 mm
    5 ohm
    630 Hz
    80 watt
    92 dB
    1.6 kg
    50 mm
    4.3 ohm
    CCAW
    ALuminium
    2
    Shielded
    Ferrite 
    >800 <6000 Hz


    DMA-A Dome Midrange features
    The pertinent command for DMA by US authorized magazine: "DMA-A obviously is of top field."
    - Vance Dickason US Pro V.C Magazine - 

    HI-end reference grade midrange loudspeaker is the new improvement of DMA-A. DMA-A new low-distortion leading resonance style structure midrange loudspeaker applied natural fibre knit special damp of 50mm ball top midrange film membrane with natural and accurate sound. High power aluminium framework voice coil match with aluminium surrounded line packed with copper can increase power output and leading resonance structure, reduce Q value of unit resonance and distortion, widen frequency response scale.
    Because the mostly distortions of midrange loudspeaker occur at resonance frequency phrase, it can reduce phrase
    		 distortion through several of low distortion leading resonance structure, and makes the whole working frequency response are in the working situation of low distortion.
    Otherwise, even if the filtered but unclean low frequency signals are input, but no noise with loudspeaker. DMA-A suit for advanced monitor system for midrange units.

    Special Swans double alnico full symmetry magnetic circuit system and low-distortion leading resonance style structure have high sensitivity and lowest distortion. There is a vent at low distortion leading resonance style structure on the back of midrange loudspeaker film membrane; the exit of vent is a big volume strong sound absorption non-resonance sealed back cavity. The vibration system includes: film membrane, voice coil, small quantity of air volume on the back of film membrane, and a reflex acoustics resonance system.


      Grafieken DMA-A - klik op de afbeelding voor een vergroting



    DMA-A Frequency Response DMA-A Impedance DMA-A Mechanical Drawing


    Swans Trinity6 3way Isodynamic Coaxial Full-Range speaker

    Go Swans HiVi en bekijk de Trinity pagina met meer pics
    prijs € 119

    TRINITY6 3way Isodynamic Coaxial Full-Range speaker - technical data
    Swans Trinity6 - Power handling. Met een goed vakkundig berekend en getest scheidingsfilter kan de totale systeem belastbaarheid max. 80 watt bedragen. Wij kunnen hiervoor een 3weg scheidingsfilter bijleveren. De opgaven van Swans zijn zonder filter en daar kunt u in de praktijk weinig mee.
    Woofer - General Data
    Nominal Power Handling (Pnom)
    Max Power Handling (Pmax)
    Sensitivity (2.83v/1m)
    Weight (M)
    Woofer Electrical Data
    Nominal Impedance (Z)
    DC (Re)
    Woofer Voice Coil & Magnet Parameters
    VC Diameter
    VC Length (H)
    VC Former
    VC Frame
    Magnet System
    Magnet Former
    Force Factor (BL)
    Gap Height (He)
    Linear Excursion (Xmax)
    Woofer Thiele-Small Parameters
    Suspension Compliance (Cms)
    Mechanical Q (Qms)
    Electrical Q (Qes)
    Total Q (Qts)
    Moving Mass (Mms)
    Effective Piston Area (Sd)
    Equivalent Air Volume (Vas)
    Resonance Frequency (Fs)
    -
    40 Watt
    80 Watt
    85 dB
    1.49 Kg
    -
    4 Ohm
    3.2 Ohm
    -
    76 mm
    11.4 mm
    CCAW
    AL
    Shielded
    Neodymium
    8.9 N/A
    6 mm
    3 mm
    -
    447 uM/N
    4.32
    0.44
    0.36
    22.9 gram
    0,0121 m2
    13.5 L
    45 Hz
    Midrange - General Data
    Nominal Power Handling (Pnom)
    Max Power Handling (Pmax)
    Sensitivity (2.83v/1m)
    Midrange Electrical Data
    Nominal Impedance (Z)
    DC (Re)
    Midrange Voice Coil & Magnet Parameters
    VC Diameter
    VC Length (H)
    VC Former
    VC Frame
    Magnet System
    Magnet Former
    Midrange Thiele-Small Parameters
    Resonance Frequency (Fs)
    Tweeter - General Data
    Nominal Power Handling (Pnom)
    Max Power Handling (Pmax)
    Sensitivity (2.83v/1m)
    Tweeter Electrical Data
    Nominal Impedance (Z)
    DC (Re)
    Tweeter Thiele Small Parameters
    Resonance Frequency (Fs)
    -
    10 W
    25 W
    88 dB
    -
    6 Ohm
    5.1 Ohm
    -
    55.1 mm
    7.5 mm
    CCAW
    AL
    Shielded
    Neodymium
    -
    65 Hz
    -
    5 Watt
    15 Watt
    86 dB
    -
    6 Ohm
    4 Ohm
    -
    700 Hz


    © Swans HiVi Inc. (USA) 2011


    M4N full-frequency




    prijs € .. bel ons


    M4N full-frequency - technical data
    Diameter x hoogte (mm)
    Nominal Impedance (Z)
    Resonance Frequency (Fs)
    Nominal Power Handling (Pnom)
    Max Power Handing (Pmax)
    Sensitivity (2.83v/1m)
    Weight (M)
    Voice Coil Diameter
    DC (Re)
    Voice Coil Length (H)
    Voice Coil Former
    Voice Coil Frame
    Magnet System
    Magnet Former
    116,5 x 63
    8 ohm
    69 Hz
    15 watt
    30 watt
    82 dB
    0.6 kg
    20 mm
    6.5 ohm
    9.0 mm
    CCAV
    Kapton
    Shielded
    Ferrite
    Force Factor (BL)
    Gap Height (He)
    Linear Excursion (Xmax)
    Suspension Compliance (Cms)
    Mechanical Q (Qms)
    Electrical Q (Qes)
    Total Q (Qts)
    Moving Mass (Mms)
    Effective Piston Area (Sd)
    Equivalent Air Volume (Vas)
    Cabinet Type
    Recommended Box Volume(Vb)
    -3dB Cut-Off Frequency(F3)
    -
    3.1 TM
    3.0 mm
    3.0 mm
    1080 uM/N
    5.39
    1.35
    1.08
    4.8 g
    0.0053 m2
    4.3 L
    Sealed
    4 L
    70 Hz
    -


    M4N Full-frequency - features

    Advanced alloy (magnesium and aluminum) cone, coated with special damping material, having good rigidity and dynamic stability, improving the sonical features of the driver. High power handling, heat-resistant Kapton® voice coil former and heat-resistant CCAW voice coil wire. Finite Element Analysis for shielded magnetic system with long-throw linear excursion design. Swan's Symmetric Motor Drive (SMD) technology makes the voice coil into a symmetric driving magnetic field, thus acquiring

    symmetric driving force, reducing voice coil inductance and back electromotive force modulation, improving the controllability of the speakers.
    Finite Element Analysis for flat & rigid iron frame, prevent the parasitic structural resonances. Using leading technology of Small/Thiele parameters in cabinet design. Suitable for midrange, surround speakers in a home theatre system, and also suitable for computer multimedia speakers.

      Grafieken M4N - klik op de afbeelding voor een vergroting
    M4N Frequency Response M4N Impedance M4N Mechanical Drawing


    M5A - bass-midrange

    prijs € .. bel ons

    M5A Bass-Midrange - technical data
    Buiten-diameter Ø
    Nominal Impedance (Z)
    Resonance Frequency (Fs)
    Nominal Power Handling (Pnom)
    Power Handling with cross-over
    Sensitivity (2.83v/1m)
    Weight (M)
    VC Diameter
    DC (Re)
    VC Length (H)
    VC Former
    VC Frame
    Magnet System
    Magnet former
    140mm
    8 Ohm
    48 Hz
    35 Watt
    70 Watt
    87 dB
    1.6 Kg
    25 mm
    6.5 Ohm
    10.4 mm
    SV 
    Kapton 
    Shielded 
    Ferrite 
    Force Factor (BL)
    Gap Height (He)
    Linear Excursion (Xmax)
    Suspension Compliance (Cms)
    Mechanical Q (Qms)
    Electrical Q (Qes)
    Total Q (Qts)
    Moving Mass (Mms)
    Effective Piston Area (Sd)
    Equivalent Air Volume (Vas)
    Cabinet Type
    Recommended Box Volume(Vb)
    Tuning Frequency (Fb)
    -3dB Cut-Off Frequency(F3)
    7.6 TM
    5.0 mm
    2.7 mm
    1038 uM/N
    6.71 
    0.36 
    0.34 
    10.8 g
    0.0087 m2
    11.2 L
    Vented
    10 L
    50 Hz
    48 Hz

     
    M5A features

  • Extremely rigid Aluminum/Magnesium cone
  • Specially made high loss rubber surround
  • Shielded double magnet system
  • High power handling Kapton® voice coil former
  • Air transparent spider
  • High density aluminum die-cast basket
  • Symmetric Motor Drive (SMD) technology

    The design of the M5a has been optimized for an extended and dynamic bass reproduction in small vented systems. Midrange clarity and accuracy is remarkable. The M5A utilizes our unique one-piece aluminum/magnesium composite cone. The cone's superior rigidity provides for dynamic and accurate reproduction of transient attacks. This contributes to a more naturally dynamic sound. The back of the cone is hand coated with a special dampening compound to further maximize performance stability and control of structural resonances. The high temperature voice coil former and SV wire, air transparent spider and venting of the coil allow for good power handling.
    		• Using Finite Element Analysis simulation, we optimized the complete magnet structure and specifically shaped the pole piece to achieve symmetric flux distribution along the travel path of the voice coil. This design approach provides better driving force linearity. It considerably reduces voice coil inductance modulation and DC offset of the moving system at high power levels. The result is much less distortion and more effective voice coil cooling. The massive aluminum die-cast basket has been developed to minimize parasitic structural resonances. A shielded magnet structure allows the M5A to be easily incorporated into audio/video applications.

    The driver may be used in a small closed box as a midrange unit in a three-way system and the good extension (50 Hz) in a vented enclosure allows for use in a two-way two-driver or MTM configured system. Recommended crossover frequency region for a two-way system design is 2-5 kHz. Incorporated into the Diva line of loudspeakers manufactured by Swans the M5a earned the Exceptional Value Award at The Home Entertainment Show.
      Grafieken M5A - klik op de afbeelding voor een vergroting


    M5A Frequency Response M5A Impedance M5A Mechanical Drawing


    F5 - bass-midrange


    prijs € .. bel ons

    F5 Bass-Midrange - technical data
    Diameter x hoogte mm
    Nominal Impedance (Z)
    Resonance Frequency (Fs)
    Nominal Power Handling (Pnom)
    Max Power Handling (Pmax)
    Sensitivity (2.83v/1m)
    Weight (M)
    VC Diameter
    DC (Re)
    VC Length (H)
    VC Former
    VC Frame
    Magnet System
    Magnet Former
    154 x 89
    8 ohm
    52 Hz
    35 watt
    70 watt
    86 dB
    1,6 kg
    25 mm
    6,5 ohm
    10,4 mm
    CCAW
    Kapton
    Shielded
    Ferrite
    Force Factor (BL)
    Gap Height (He)
    Linear Excursion (Xmax)
    Suspension Compliance (Cms)
    Mechanical Q (Qms)
    Electrical Q (Qes)
    Total Q (Qts)
    Moving Mass (Mms)
    Effective Piston Area (Sd)
    Equivalent Air Volume (Vas)
    Cabinet Type
    Recommended Box Volume(Vb)
    Tuning Frequency(Fb)
    -3dB Cut-Off Frequency(F3)
    8.3 TM
    5 mm
    2,7 mm
    828 uM/N
    4,31
    0,36
    0,33
    11,5 g
    79 cm2
    7,3 L
    Vented
    8 L
    50 Hz
    47 Hz
    Recommended crossover frequency region for a two-way system: 2 - 4 kHz.
    The driver may be incorporated in a small closed box as a bass-midrange unit, when a subwoofer is employed


    F5 - bass-midrange features
  • Light and extremely rigid Kevlar/paper composite cone
  • specially made high loss rubber surround
  • shielded double magnet motor structure
  • high power handling aluminum former voice coil
  • central phase plug
  • high-density aluminum die-cast basket
    The design of F5 has been optimized for an extended and dynamic bass reproduction in small vented systems as well as for midrange clarity and accuracy.

    F5 utilizes a newly developed matrix of Kevlar and paper fibers. As a result, the cone weighs less, is more rigid and has an improved dampening factor over conventional Kevlar materials. The back of the cone is hand coated with a special dampening compound to further maximize performance stability and control of structural resonances.
    		•  The driver utilizes a central phase plug to avoid air compression and internal air volume resonance. The plug improves frequency response and dispersion as well. The aluminum former voice coil and air transparent spider contributes to the linear operation of the transducer at high power levels.
    The massive aluminum die-cast basket has been developed to minimize parasitic structural resonances.

    A shielded magnet structure allows the F5 to be easily incorporated into audio/video applications.
    F5 has a remarkably smooth frequency response within +/-2 dB tolerance in 120 - 5000 Hz range, measured in IEC baffle.

       Grafieken F5- klik op de afbeelding voor een vergroting
    F5 Frequency Response F5 Impedance F5 Mechanical Drawing


    F6 bass-midrange


    prijs € .. bel ons

    F6 Bass-Midrange - technical data
    Diameter x hoogte (mm)
    Nominal Impedance (Z)
    Resonance Frequency (Fs)
    Nominal Power Handling (Pnom)
    Max Power Handling (Pmax)
    Sensitivity (2.83v/1m)
    Weight (M)
    VC Diameter
    DC (Re)
    VC Length (H)
    VC Former
    VC Frame
    Magnet System
    Magnet Former
    197 x 92
    8 ohm
    45 Hz
    45 watt
    90 watt
    88 dB
    2.1 kg
    25 mm
    6.5 ohm
    14.5 mm
    SV 
    Kapton 
    Shielded 
    Ferrite 
    Force Factor (BL)
    Gap Height (He)
    Linear Excursion (Xmax)
    Suspension Compliance (Cms)
    Mechanical Q (Qms)
    Electrical Q (Qes)
    Total Q (Qts)
    Moving Mass (Mms)
    Effective Piston Area (Sd2)
    Equivalent Air Volume (Vas)
    Cabinet Type:
    Recommended Box Volume(Vb)
    Tuning Frequency(Fb)
    -3dB Cut-Off Frequency(F3)
    9.0 TM
    6.0 MM
    4.3 mm
    658 uMN
    3.91 
    0.38 
    0.35
    18.3 g
    139 cm2
    16.4 L
    Vented
    15 L
    45 Hz
    42 Hz


    F6 bass-midrange - features

  • Light and extremely rigid Kevlar/paper composite cone;
  • specially made high loss rubber surround;
  • shielded double magnet motor structure;
  • high power handling aluminum former voice coil;
  • central phase plug;
  • high-density aluminum die-cast basket. 
    The design of F6 has been optimized for balanced and dynamic low bass reproduction in small or medium vented systems. Midrange clarity and tonal balance is remarkable.

    F6 utilizes a newly developed matrix of Kevlar and paper fibers. As a result, the cone weighs less, is more rigid and has an improved dampening factor over conventional Kevlar materials.


    • The back of the cone is hand coated with a special dampening compound to further maximize performance stability and control of structural resonances. The driver utilizes a central phase plug to avoid air compression and internal air volume resonance. The plug improves frequency response and dispersion as well. The aluminum former voice coil and air transparent spider contributes to the linear operation of the transducer at high power levels.

    The massive aluminum die-cast basket has been developed to minimize parasitic structural resonances.
    The shielded magnet structure allows the F6 to be easily incorporated into audio/video applications.


       Grafieken F6 - klik op de afbeelding voor een vergroting
    F6 Frequency Response F6 Impedance F6 Mechanical Drawing


    M6A - bass-midrange


    prijs € .. bel ons


    M6A Bass-Midrange - technical data
    Diameter
    Nominal Impedance (Z)
    Resonance Frequency (Fs)
    Nominal Power Handling (Pnom)
    Max Power Handling (Pmax)
    Sensitivity (2.83v/1m)
    Weight (M)
    VC Diameter
    DC (Re)
    VC Length (H)
    VC Former
    VC Frame
    Magnet System
    Magnet Former
    174 mm
    8 Ohm
    46 Hz
    45 watt
    90 Watt
    88 dB
    2.0 Kg
    25 mm
    6.5 Ohm
    14.5 mm
    SV
    Kapton
    Shielded
    Ferrite
    Force Factor (BL)
    Gap Height (He)
    Linear Excursion (Xmax)
    Suspension Compliance (Cms)
    Mechanical Q (Qms)
    Electrical Q (Qes)
    Total Q (Qts)
    Moving Mass (Mms)
    Effective Piston Area (Sd)
    Equivalent Air Volume (Vas)
    Cabinet Type
    Recommended Box Volume(Vb)
    Tuning Frequency(Fb)
    -3dB Cut-Off Frequency(F3)
    7.8 TM
    6.0 mm
    4.3 mm
    874 uM/N
    3.94
    0.42
    0.38
    13.6 g
    0.0139 m2
    21.9 L
    Vented
    14 L
    48 Hz
    47 Hz

    M6A - bass-midrange features

  • Extremely rigid Aluminum/Magnesium cone
  • Specially made high loss rubber surround
  • Shielded double magnet system
  • High power handling Kapton® voice coil former
  • Air transparent spider
  • High density aluminum die-cast basket; 
  • Symmetric Motor Drive (SMD) technology.

    The design of the M6a has been optimized for an extended and dynamic bass reproduction in small vented systems.
    Midrange clarity and accuracy is remarkable. The M6a utilizes our unique one-piece aluminum/magnesium composite cone. The cone's superior rigidity provides for dynamic and accurate reproduction of transient attacks. This contributes to a more naturally dynamic sound. The back of the cone is hand coated with a special dampening compound to further maximize performance stability and control of structural resonances.
    The high temperature voice coil former and SV wire, air transparent spider and venting of the coil allow for good power handling.
    		•
    Using Finite Element Analysis simulation, we optimized the complete magnet structure and specifically shaped the pole piece to achieve symmetric flux distribution along the travel path of the voice coil. This design approach provides better driving force linearity. It considerably reduces voice coil inductance modulation and DC offset of the moving system at high power levels. The result is much less distortion and more effective voice coil cooling.

    The massive aluminum die-cast basket has been developed to minimize parasitic structural resonances.

    A shielded magnet structure allows the M6a to be easily incorporated into audio/video applications. The driver may be used in a small closed box as a midrange unit in a three-way system.
    The good extension (45 Hz) allows the use in a vented enclosure in a two-way two-driver or MTM configured system. Recommended crossover frequency region for a two-way system design is 2-3 kHz.  The M6a earned the Exceptional Value Award at The Home Entertainment Show.


       Grafieken M6A - klik op de afbeelding voor een vergroting


    M6A Frequency Response M6A Impedance M6A Mechanical Drawing


    M8A - bass-midrange



    prijs € .. bel ons


    M8A - technical data
    Diameter
    Nominal Impedance (Z)
    Resonance Frequency (Fs)
    Nominal Power Handling (Pnom)
    Max Power Handling (Pmax)
    Sensitivity (2.83v/1m)
    Weight (M)
    VC Diameter
    DC (Re)
    VC Length (H)
    VC Former
    VC Frame
    Magnet System
    Magnet Former
    215 mm
    8 Ohm
    33 Hz
    80 Watt
    160 Watt
    88 dB
    2.5 Kg
    35 mm
    6.5 Ohm
    17.5 mm
    SV
    Kapton
    Outside 
    Ferrite
    Force Factor (BL)
    Gap Height (He)
    Linear Excursion (Xmax)
    Suspension Compliance (Cms)
    Mechanical Q (Qms)
    Electrical Q (Qes)
    Total Q (Qts)
    Moving Mass (Mms)
    Effective Piston Area (Sd)
    Equivalent Air Volume (Vas)
    Cabinet Type 
    Recommended Box Volume(Vb)
    Tuning Frequency(Fb)
    -3dB Cut-Off Frequency(F3)
    10.5 TM
    6.0 mm
    5.8 mm
    605 uM/N
    4.59
    0.49 
    0.44 
    38.1 g
    0.0214 m2
    42.3 L
    Vented 
    28 L
    35 Hz
    36 Hz

    M8A  - features

  • Extremely rigid Aluminum/Magnesium cone
  • Specially made high loss rubber surround
  • High power handling Kapton® voice coil former
  • Air transparent spider
  • High density aluminum die-cast basket
  • Symmetric Motor Drive (SMD) technology

    The design of the M8a has been optimized for an extended and dynamic bass reproduction in small vented systems. Clarity and accuracy is remarkable. The M8a utilizes our unique one-piece aluminum/magnesium composite cone. The cone's superior rigidity provides for dynamic and accurate reproduction of transient attacks. This contributes to a more naturally dynamic sound and superior definition and articulation in the mid-bass region.
    The high temperature voice coil former and SV wire, air transparent spider and venting of the coil allow for good power handling.
    		•
    Using Finite Element Analysis simulation, we optimized the complete magnet structure and specifically shaped the pole piece to achieve symmetric flux distribution along the travel path of the voice coil. This design approach provides better driving force linearity. It considerably reduces voice coil inductance modulation and DC offset of the moving system at high power levels. The result is much less distortion and more effective voice coil cooling.

    The massive aluminum die-cast basket has been developed to minimize parasitic structural resonances. The M8a provides excellent quality bass definition with good extension (40 Hz). It can be used to good effect in a medium sized two-way system or as a woofer in a three-way system. Incorporated into the Diva line of loudspeakers manufactured by Swans the M8a earned the Exceptional Value Award at The Home Entertainment Show 2000. Recommended crossover frequency region for a two-way system design is 1-2 kHz.

       Grafieken M8A - klik op de afbeelding voor een vergroting


    M8A Frequency Response M8A Impedance M8A Mechanical Drawing


    F8 bass-midrange



    prijs € .. bel ons

    F8 bass-midrange - technical data
    Diameter x hoogte (mm)
    Nominal Impedance (Z)
    Resonance Frequency (Fs)
    Nominal Power Handling (Pnom)
    Max Power Handling(Pmax)
    Sensitivity (2.83v/1m)
    Weight (M)
    VC Diameter
    DC (Re)
    VC Length (H)
    VC Former
    VC Frame
    Magnet System
    Magnet Former
    217 x 106
    8 ohm
    36 Hz
    60 watt
    120 watt
    87 dB
    2.9 kg
    35 mm
    6.5 ohm
    17.5 mm
    SV
    Kapton
    Shielded
    Ferrite
    Force Factor (BL)
    Gap Height (He)
    Linear Excursion (Xmax)
    Suspension Compliance (Cms)
    Mechanical Q (Qms)
    Electrical Q (Qes)
    Total Q (Qts)
    Moving Mass (Mms)
    Effective Piston Area (Sd)
    Equivalent Air Volume (Vas)
    Cabinet Type
    Recommended Box Volume(Vb)
    Tuning Frequency(Fb)
    -3dB Cut-Off Frequency(F3)
    10.1 TM
    7.5 mm
    5.0 mm
    567 uM/N
    1.73
    0.51
    0.39
    35.3 g
    0.0214 m2
    36.9 L
    Vented
    19 L
    40 Hz
    47 Hz
    Recommended crossover frequency for two-way system design: 1.8-2.2 kHz.



    F8 Bass-Midrange - features

  • Light and extremely rigid Kevlar/paper composite cone;
  • specially made high loss rubber surround;
  • shielded double magnet motor structure;
  • high power handling aluminum former voice coil;
  • flat linear spider;
  • high-density aluminum die-cast basket.
    An accurate and uncompressed sound performance at realistic loudness levels represents the ideology implemented in this driver. The design of F8 has been optimized for balanced and dynamic low bass reproduction in compact or medium vented systems. Midrange clarity and tonal balance is remarkable.

    F8 utilizes a newly developed matrix of Kevlar and paper fibers. As a result, the cone weighs less, is more rigid and has an improved dampening factor over conventional Kevlar materials.


    • The back of the cone is hand coated with a special dampening compound to further maximize performance stability and control of structural resonances. The driver utilizes a vented aluminum voice coil former and flat air transparent spider to avoid air compression and ensure maximum power handling.

    The massive aluminum die-cast basket has been developed to minimize parasitic structural resonances.

    A shielded magnet structure allows the F8 to be easily incorporated into audio/video applications.

    F8 has a remarkably smooth frequency response (within +/- 1.7 dB tolerance in 70 - 3000 Hz range, measured in IEC baffle).


    Grafieken F8 - klik op de afbeelding voor een vergroting
    F8 Frequency Response F8 Impedance F8 Mechanical Drawing



    SWANSPEAKER SP10 SUBWOOFER

    prijs € 149

    SP10 SUBWOOFER - technical data
    General Data
    Nominal Power Handling (Pnom)(W)
    Max Power Handling (Pmax)(W)
    Sensitivity (2.83v/1m)(dB)
    Diameter mm
    Weight (M)(Kg)
    Electrical Data
    Nominal Impedance (Z)(Ohms)
    DC (Re)(Ohms)
    Voice Coil and Magnet Parameters
    VC Diameter (mm)
    VC Length (H)(mm)
    VC Former
    VC Frame
    Magnet System
    Magnet Former
    Force Factor (BL)(N/A)
    Gap Height (He)(mm)
    Linear Excursion (Xmax)(mm)
    Thiele-Small Parameters
    Suspension Compliance(Cms)(uM/N)
    Mechanical Q (Qms)
    Electrical Q (Qes)
    Total Q (Qts)
    Moving Mass (Mms)(g)
    Effective Piston Area (Sd)(m2)
    Equivalent Air Volume (Vas)(L)
    Resonance Frequency (Fs)(Hz)
    -
    500
    1000
    84
    261
    13
    -
    4
    3.4
    -
    76
    46
    SV
    AL
    Outside
    Ferrite
    16.6
    15
    15.5
    -
    91.4
    4.83
    0.65
    0.57
    235
    0.0363
    17.1
    34


    SWANS SP10 Subwoofer
    HiVi Symmetric Motor Drive (SMD) technology makes the voice coil into a symmetrical driving magnetic field, thus acquiring symmetrical reducing voice coil inductance and back electromotive force modulation, improving the controllability of the speakers.
    The voice coil in thickened black A1 frame increases the endurance and absorbing in quantity of heat of speakers,    		 and linear stroke is improved to XMAX 15.5mm and bass sensitivity by band-wound voice coil. The membrance of multiple structure in basic thickened NOPRESS paper.
    High rigidity structure with fine recovery an air permeability. Sp10 is a special design in bass for 2001 with excellent system.

    SP10 - KLIK HIER voor meer en grote afbeeldingen en alle gegevens

    SP10 Frequency Response SP10 Impedance SP10 Mechanical Drawing

    © Swans HiVi Inc. (USA) 2011



    F10 high-end woofer

    prijs € .. bel ons

    F10 High-end woofer - technical data
    Diameter x hoogte (mm)
    Nominal Impedance (Z)
    Resonance Frequency (Fs)
    Nominal Power Handling (Pnom)
    Max Power Handling(Pmax)
    Sensitivity (2.83v/1m)
    Weight (M)
    VC Diameter
    DC (Re)
    VC Length (H)
    VC Former
    VC Frame
    Magnet System
    Magnet Former
    Force Factor (BL)
    Gap Height (He)
    Linear Excursion (Xmax)
    Suspension Compliance (Cms)
    Mechanical Q (Qms)
    Electrical Q (Qes)
    Total Q (Qts)
    Moving Mass (Mms)
    Effective Piston Area (Sd)
    Equivalent Air Volume (Vas)
    Cabinet Type
    Recommended Box Volume(Vb)
    Tuning Frequency(Fb)
    -3dB Cut-Off Frequency(F3)
    286 x 112
    8 ohm
    30 Hz
    100 watt
    200 watt
    89 dB
    4.5 kg
    50 mm
    6.5 ohm
    22 mm
    SV 
    Kapton 
    Outside
    Ferrite 
    15.7 TM
    10 mm
    6.0 mm
    385.3 uM/N
    1.79 
    0.35 
    0.29
    70.3 g
    363 cm2
    72.1 L
    Vented 
    60 L
    31 Hz
    30 Hz


    F10 High-end woofer - features

  • Light and extremely rigid Kevlar/paper composite cone;
  • specially made high loss rubber surround;
  • high power handling aluminum former voice coil;
  • vented pole piece;
  • long-throw motor system with extended linear excursion;
  • high-density aluminum die-cast basket.
    An accurate and uncompressed reproduction of very low bass at realistic levels represents the ideology implemented in this driver. The design of F10 has been optimized for balanced and dynamic low bass performance in compact or medium size vented systems and subwoofers. F10 utilizes a newly developed matrix of Kevlar and paper fibers.

    • As a result, the cone weighs less, is more rigid and has an improved dampening factor over conventional Kevlar materials. It allows to keep distortion very low through wide frequency and power range.
    The driver has a vented pole piece to avoid air compression and ensure maximum power handling. Together with long-throw design this feature provides clean and articulated bass performance at high volumes.
    The massive aluminum die-cast basket has been developed to minimize parasitic structural resonances. The shielded magnet structure allows the F10 to be easily incorporated into audio/video applications. SPL graph represents the nearfield frequency response of the woofer in IEC baffle corrected for 1w/1m.

       KLIK HIER voor vergrotingen en meer afbeeldingen
    Frequency Response Impedance Mechanical Drawing

    © Swans HiVi Inc.(USA) 2011 REMO luidsprekerspecialist - REMO hifi audiospecialist - REMO home cinema specialist - tel 070 38 68 440
    TOP OF PAGE